Cater Export

Cater Export > Products > Excavator > CAT 320 Caterpillar hydraulic excavator 30-ton 1.80m³>

CAT 320 Caterpillar hydraulic excavator 30-ton 1.80m³

Bucket Capacity: 1.80 m3

Operating Weight: 30.8 t

Engine Power: 225 kW

Machine inspection
Factory visiting
Parameter Value
Brand & Model Cat 330 Hydraulic Excavator
Brochure Reference ACXQ3565-00, Version 07D, China
Emission Standard China Non-Road Stage IV
Engine Model Cat C7.1 twin-turbo diesel engine
Engine Displacement 7.01 L / 428 in³
Engine Power - ISO 14396 225 kW / 302 hp
Net Power - ISO 9249 223.8 kW / 300 hp
Rated Engine Speed 2000 rpm
Bore x Stroke 105 x 135 mm
Operating Weight - 600 mm Track Shoes 30800 kg / 67900 lb
Operating Weight - 800 mm Track Shoes 31400 kg / 69200 lb
Operating Weight Configuration Heavy-duty extended undercarriage, heavy-duty reach boom, heavy-duty R3.2 m stick, heavy-duty 1.80 m³ bucket and 6700 kg counterweight
Main Hydraulic System - Maximum Implement Flow 560 L/min / 148 gal/min
Hydraulic Pressure - Normal Implement 35000 kPa / 5075 psi
Hydraulic Pressure - Heavy Lift Implement 38000 kPa / 5510 psi
Hydraulic Pressure - Travel 35000 kPa / 5075 psi
Hydraulic Pressure - Swing 29800 kPa / 4320 psi
Fuel Tank Capacity 474 L / 125.2 gal
DEF Tank Capacity 41 L / 10.8 gal
Cooling System Capacity 25 L / 6.6 gal
Engine Oil Capacity 25 L / 6.6 gal
Swing Drive Capacity 10 L / 2.6 gal
Final Drive Capacity 5.5 L / 1.5 gal each
Hydraulic System Capacity 310 L / 81.9 gal, including tank
Hydraulic Tank Capacity 147 L / 38.8 gal
Boom 6.15 m heavy-duty reach boom
Stick 3.2 m heavy-duty reach stick
Bucket Capacity 1.80 m³ / 2.35 yd³
Cab Top Height 3060 mm / 10 ft 1 in
Handrail Height 3060 mm / 10 ft 1 in
Shipping Length 10420 mm / 34 ft 2 in
Tail Swing Radius 3130 mm / 10 ft 3 in
Track Roller Center Distance 3990 mm / 13 ft 1 in
Ground Clearance 490 mm / 1 ft 7 in
Track Gauge 2590 mm / 8 ft 6 in
Shipping Width - 600 mm Track Shoes 3190 mm / 10 ft 6 in
Shipping Width - 700 mm Track Shoes 3290 mm / 10 ft 10 in
Shipping Width - 800 mm Track Shoes 3390 mm / 11 ft 1 in
Counterweight Clearance 1120 mm / 3 ft 8 in
Maximum Digging Depth 7250 mm / 23 ft 9 in
Maximum Reach at Ground Level 10690 mm / 35 ft 1 in
Maximum Cutting Height 10000 mm / 32 ft 10 in
Maximum Loading Height 6940 mm / 22 ft 9 in
Minimum Loading Height 2290 mm / 7 ft 6 in
Maximum Depth for 2440 mm Flat Bottom 7090 mm / 23 ft 3 in
Maximum Vertical Wall Digging Depth 5790 mm / 19 ft 0 in
Bucket Digging Force - ISO 179 kN / 40200 lbf
Stick Digging Force - ISO 126 kN / 28300 lbf
Standard Grade Technology Cat Grade with 2D system
Standard Grade Assistance Cat Grade with Assist
Standard Payload Technology Cat Payload
Standard Safety Technology 2D electronic fence, lift assist, rear-view camera and ground-level engine shutdown switch
Operator Monitor 203 mm / 8 in LCD touchscreen; 254 mm / 10 in high-resolution LCD touchscreen available as an option
Cab Safety ISO-certified ROPS cab
Fuel Consumption Claim Up to 15% lower than Cat 330D2 under the stated comparison conditions
Maintenance Cost Claim Up to 25% lower than Cat 330D2 under the stated comparison conditions
Productivity Claim Up to 15% more material moved than Cat 330D2 at the same fuel consumption under the stated conditions

The Cat 330 is a powerful 30 ton hydraulic excavator designed for contractors who need high digging force, large hydraulic output and reliable performance in demanding earthmoving applications. It is equipped with a Cat C7.1 twin-turbo diesel engine that complies with the China Non-Road Stage IV emission standard. The engine delivers 225 kW / 302 hp under ISO 14396, while net power is listed at 223.8 kW / 300 hp under ISO 9249. The brochure lists an operating weight of 30800 kg with 600 mm track shoes and 31400 kg with 800 mm track shoes, depending on the selected configuration.

The Cat C7.1 engine has a 7.01 L displacement, a 105 mm bore, a 135 mm stroke and a rated speed of 2000 rpm. The twin-turbo diesel configuration is matched with an electro-hydraulic system and a large hydraulic pump. Maximum implement flow reaches 560 L/min, while normal implement pressure is 35000 kPa and heavy-lift implement pressure reaches 38000 kPa. Travel pressure is 35000 kPa and swing pressure is 29800 kPa. This combination provides a strong working foundation for excavation, trenching, quarry preparation, road construction and high-volume truck loading.

The standard working arrangement uses a 6.15 m heavy-duty reach boom, a 3.2 m heavy-duty reach stick and a heavy-duty 1.80 m³ bucket. The machine is also configured with a heavy-duty extended undercarriage and a 6700 kg counterweight. These components are designed to work together, giving the excavator a stable base for lifting, digging and loading. The actual operating weight and transport dimensions depend on track-shoe width and the final machine configuration, so the selected boom, stick, bucket, counterweight and undercarriage should be confirmed before transport planning.

For contractors looking for a high production excavator, the Cat 330 offers measurable reach and digging capability. Maximum digging depth is 7250 mm, maximum reach at ground level is 10690 mm, maximum cutting height is 10000 mm and maximum loading height is 6940 mm. The maximum depth for a 2440 mm flat bottom is 7090 mm, while maximum vertical-wall digging depth is 5790 mm. Bucket digging force is listed at 179 kN and stick digging force at 126 kN under ISO conditions. These figures provide a useful reference for foundations, drainage, bulk excavation, quarry work and heavy material handling.

The machine's productivity is supported by a high-capacity hydraulic system rather than engine power alone. A 560 L/min maximum implement flow allows the boom, stick, bucket and selected hydraulic attachments to work within a substantial flow range. The heavy-lift pressure setting reaches 38000 kPa, supporting lifting operations within the approved working range. Actual production depends on soil or rock conditions, bucket fill factor, loading height, truck matching, cycle time, operator experience and jobsite organization. A project-specific demonstration remains the best method for estimating hourly production.

Cat Grade with a 2D system is included in the standard technology package. It helps operators set target depths and slope offsets directly through the monitor, reducing the need for repeated external checking. Up to four commonly used target depths and slope offsets can be stored. Automatic movement of the boom, stick and bucket supports more consistent grading, while single-lever excavation can reduce repetitive control work. These functions are valuable for roadbed preparation, drainage, foundations and slope work where depth and grade accuracy affect rework and material cost.

Cat Payload uses weighing during machine movement to help operators manage load targets with a bucket or grapple. It can help prevent underloading and overloading and can support more consistent truck loading. Automatic tracking provides production information for project management, while up to 30 days of operating statistics can be downloaded through the monitor USB port without an internet connection or VisionLink subscription. Advanced 2D Grade and 3D Grade are available options. Advanced 2D adds a 254 mm / 10-inch high-resolution touchscreen and field design functions, while 3D Grade adds GPS and GLONASS positioning.

The Cat 330 brochure states that the machine can move up to 15% more material than the Cat 330D2 at the same fuel consumption under the stated comparison scenario. It also presents a fuel-efficiency improvement of up to 15% and a maintenance-cost reduction of up to 25% compared with the Cat 330D2. These are documented comparison claims, not universal guarantees. Actual results will depend on the material, attachment, idle time, operator, truck fleet, climate, work method and maintenance practice. Buyers should use the figures for planning and verify expected results through a duty-cycle test or comparable project data.

As a fuel efficient excavator, the Cat 330 provides operators with selectable power-management functions. The machine offers power modes including Power Mode and Smart Mode, with the equipment list also referring to three selectable power modes. Power Mode is intended for demanding applications such as truck loading and trenching. Smart Mode automatically matches engine speed and hydraulic power to the work requirement, helping manage fuel use. Operator ID settings can store preferred power-mode selections, and owners can lock the machine to a required mode to help control fuel consumption across a fleet.

The fuel tank capacity is 474 L and the DEF tank capacity is 41 L. The cooling system and engine oil each hold 25 L, while the swing drive holds 10 L and each final drive holds 5.5 L. The hydraulic system capacity is 310 L including the tank, and the hydraulic tank capacity is 147 L. These values support service planning and fluid management. They do not establish a guaranteed working range or fixed hourly fuel-consumption figure because fuel use changes with load, material, attachment, ambient temperature, idle time and operator technique.

Maintenance design focuses on longer service intervals, centralized filters and easier access. The brochure describes increased hydraulic-filter dirt-holding capacity, extended oil- and fuel-filter service intervals, and a new Cat air filter with twice the dirt-holding capacity of the previous design. The high-efficiency electric cooling fan operates when required and can reverse to help keep the radiator core free of debris. Manual and automatic reversing-fan settings are available. These features are intended to reduce unnecessary maintenance interruptions and help extend machine uptime in dusty working environments.

The Cat 330 uses an ISO-certified ROPS cab with sealed construction and noise-control features. Large windows and lower front, right and rear profiles provide a broad view of the working area. A standard rear-view camera assists visibility around the machine, while 360-degree visibility is available as an option. The standard seat is wide and adjustable, and the deluxe cab package includes a heated air-suspension seat. The standard monitor is a 203 mm / 8-inch LCD touchscreen, with a 254 mm / 10-inch high-resolution touchscreen available as an option.

Cab convenience features include an integrated Bluetooth radio, USB ports for charging and phone connection, a 12V DC outlet, an auxiliary port, rear, overhead and console storage compartments, and cup and bottle holders. The operator can customize joystick functions through the monitor. Cat single-lever control allows travel and steering to be controlled with one hand after activating the relevant function. The engine uses keyless push-button start, while operator ID codes can restrict and track machine access. An optional Bluetooth key fob can also be used for access-code entry.

Safety systems are designed to protect both people and equipment. The standard 2D electronic fence uses boundaries set through the monitor to automatically stop excavator movement above, below, to the sides and in front of the machine. Electronic walls can be configured for swing, front protection, cab protection, maximum height and minimum depth. This can help reduce contact with overhead obstacles, underground facilities, restricted zones and excessive swing. Lift assist provides visual and audible warnings to help the operator understand whether a load is within the safe working range.

Cat Command remote control is available for applications where the operator needs to remain away from potential hazards. The brochure describes an offboard kit with Wi-Fi radio, camera and microphone to support remote operation. Ground-accessible maintenance checks include the engine-oil dipstick, fuel-water separator, fuel-tank water and sediment drain and cooling-system coolant-level check. A right-side service platform with anti-slip perforated steps is designed to provide safer access to upper maintenance areas. These features can help reduce unnecessary exposure to difficult or hazardous worksite conditions.

Structural durability is another central part of the configuration. The brochure describes an electro-hydraulic system designed to reduce fuel consumption and reduce the use of hoses and couplings. A larger swing drive and swing-bearing support increase swing torque for heavier work. Reinforced front structures and undercarriage components support greater lift force, counterweight and torque. The oval hydraulic tank is designed for improved stress resistance, while integrated component protection helps shield technical parts. Lubricated tracks with master pins are described as providing increased retention force.

The brochure also highlights a reduction in hydraulic connections and hose length compared with the Cat 330D2. It states that the new-generation Cat 330 uses 74 m less hydraulic hose and 116 fewer hydraulic fittings than the Cat 330D2. These figures are brochure comparison data and should be retained with their model reference. Fewer connections can simplify the hydraulic layout and reduce potential leak points, but the final service result still depends on correct maintenance, operating conditions, attachment use and inspection discipline.

Attachment flexibility allows the excavator to support more than one commercial application. Listed Cat attachments include buckets, hydraulic hammers, hydraulic shears, grapples, rippers, thumbs, quick couplers, multi-processors, vibratory plate compactors, pulverizers and tiltrotators. Each attachment should be matched to the machine's weight, hydraulic flow, pressure and control configuration. The Cat PL161 attachment locator uses Bluetooth to help operators find tools and equipment through the onboard reader or Cat mobile application. Optional attachment identification can confirm the tool and its settings.

The hydraulic hammer protection function is designed to reduce attachment wear. The brochure states that continuous blank firing produces a warning after 15 seconds and automatically shuts down the hydraulic hammer after 30 seconds. This helps prevent unnecessary overload of the attachment and excavator. The exact attachment-control package should be confirmed in the final quotation because the equipment list includes both two-pump tool control and basic single-pump high-pressure flow options. The selected attachment and hydraulic circuit should be matched before delivery.

Cat Product Link and VisionLink can provide remote information about machine location, operating hours, fuel use, productivity, idle time, maintenance alerts, diagnostic codes and machine condition. Remote troubleshooting allows a Cat dealer to perform diagnostic tests on connected equipment, while Remote Flash can update onboard software without a technician being physically present. The brochure states that update time can be reduced by up to 50% in the described process. Availability of connectivity, subscriptions and dealer services varies by region and should be confirmed locally.

Transport planning must account for the selected track width. The standard dimensions include a shipping length of 10420 mm, a cab-top height of 3060 mm, a handrail height of 3060 mm, a tail swing radius of 3130 mm, a track gauge of 2590 mm, a ground clearance of 490 mm and a counterweight clearance of 1120 mm. Shipping width is 3190 mm with 600 mm track shoes, 3290 mm with 700 mm track shoes and 3390 mm with 800 mm track shoes. The final transport permit and trailer selection should be based on the actual delivered configuration.

Overall, the Cat 330 is a heavy duty excavator with 225 kW / 302 hp ISO 14396 power, 560 L/min maximum implement flow, 179 kN bucket digging force, 126 kN stick digging force and an operating weight of 30800 kg or 31400 kg depending on track configuration. Its combination of high hydraulic output, large bucket capacity, Grade technology, Payload control, electronic fencing, attachment support and maintenance access makes it suitable for demanding earthmoving operations. The final machine should be specified according to the required boom, stick, bucket, track shoes, cab, technology, safety and hydraulic options.

The Cat 330 is also a 30 ton hydraulic excavator that should be evaluated through the complete jobsite system rather than a single specification. Match the machine to the material, trucks, attachment, haul distance, grade requirements and local transport conditions. Confirm the final operating weight, emission documentation, option availability, connectivity service and dealer support before purchase. When these factors are aligned, the Cat 330 provides a documented platform for high-volume excavation, truck loading, quarry preparation, road construction and other heavy-duty applications.

Inquiry

Confirm Order

Production

(45 wordays)

Shipping

(7 days to port)

Send Inquiry for Lowest Price!

More Excavator Machines

Contact

Tel:+8615960378211
Email:[email protected]

Address: Unit 8,room 704,NO.492,XingLinWan Road,Jimei District,XiaMen Fujian China

Address: Unit 8,room 704,NO.492,XingLinWan Road,Jimei District,XiaMen Fujian China
Email:[email protected]
© 2026 Cater Export - All Rights Reserved Privacy policy

inquiry now!

Live chat